Ryan Greenberg

Ryan Greenberg

Thermaltake was one of our many stops upon our Computex 2017 journey, where the company was showing off a very expensive prototype case, as well as a more modest pair of ATX mid-towers. On the channel, we have a video showcasing these enclosures, so be sure to check that out if video format is preferable.

Continuing our Coverage of Computex 2017, we met with the Be Quiet! team at their booth to discuss some of their new and upcoming products. We took a look at their Silent Loop CLC CPU cooler, the new SFX-L PSU, the Shadow Rock TF2 air cooler, and the limited edition Dark Base Pro 900 - White Edition case.

The Dark Base Pro 900 was a case we covered last year at Computex, if it feels familiar. This year, Be Quiet! displayed their new iteration of the Dark Base Pro 900 - now in white. The White Edition uses the exact same tooling as the Dark Base Pro 900, with changes entirely cosmetic. Be Quiet! reps noted that the color-matching process was the most time consuming, and that the run will be limited at first to gauge market reception. The first all white case from Be Quiet! will be limited to 2000 units worldwide, with a specific number being given to each enclosure (a nameplate in the top-right corner, near the drive cages). The White Edition will ship with an included three 140mm Silent wings 3 fans in black, contrasting the white (we’re not sure if we like that just yet), and hosts all the usual features of the DBP900. The chassis is capable of hosting three 140mm fans at the front, another three 140mm fans on top, a single 140mm at the rear for exhaust, and another single 140mm fan at the bottom, near the PSU; that brings it up to eight possible fans in total.

We stopped by the Cooler Master booth at Computex 2017 to take a look at two of their new iterations of previous Cooler Master cases: the HAF and the Cosmos ATX towers. The HAF, or High Airflow, cases were popular mid- and full-towers a few years ago, and CM will be bringing that back with their new Master Case H500P. The former Cosmos cases are also being refreshed for 2017 in the form of the new Cosmos C700P.

The Cooler Master H500P brings back the HAF series with dual 200mm RGB fans at the front for intake (included), and will provide less noise and more airflow than traditional 120mm or 140mm options. Static pressure is theoretically lower, but we’ll test all that in due time. Front intake is available through mesh on each side and the top and bottom of the curved acrylic front panel. The H500P comes with the two 200mm RGB fans included at the front but is capable of housing another three 140mm fans at the top -- above the top chamber -- or three 120mm fans within the lower chamber of the top panel. A 140mm radiator or fan mount is also present at the rear.

We attended AMD’s Press Conference event today in Taipei, Taiwan at Computex, where the company discussed its existing and new products for 2017. For our audience, the main focuses would be on the Threadripper 16C/32T CPU and Radeon RX Vega GPUs, both of which were highlighted at the event. AMD also began to lay-out their plan to enter the mobile market with R7 and R5 CPUs, as well as RX 500 series GPUs. The Ryzen R3 CPU lineup was not discussed in depth, but a Q3 launch date was confirmed during the press conference.

AMD presented their Vega Frontier Edition earlier in the month, with the card aimed towards deep learning, content creation, and enterprise industries alike. Vega: FE’s launch date is set for June 27 . The press event provided very limited information in regards to the Radeon RX Vega gaming GPUs, with the information dispensed primarily pertaining to the release date: RX Vega GPUs are set to launch at Siggraph 2017, which runs from July 30 to August 3, 2017 in Los Angeles.

We attended EVGA’s Press Day in Taipei before the start of Computex, where we tore down the new Kingpin 1080 Ti card and spoke with engineering staff about power design. EVGA showcased a number of other items too, including the DG-70 line of cases, a new mechanical keyboard, and EVGA’s new SC15 laptop.

The new ATX mid-tower cases are the DG-73, DG-75, and DG-76, all of which use the same tooling (from what we’ve seen thus far), meaning the differences are largely cosmetic. The DG-73 will be the most budget-focused and features an acrylic side panel window, while the DG-75/76 have tempered glass panels. All three have a tempered glass front panel that is slightly offset, which could allow for front airflow intake through side ventilation, something we’ve seen before. Cable routing could prove to be difficult as there are no dedicated pass-throughs or grommets; instead, the DG-73, DG-75, and DG-76 use an open plate style design for cable management.

Advertisement:

  VigLink badge