Welcome, Guest
Username: Password: Remember me

TOPIC: Pump gen question

Pump gen question 4 months 3 days ago #15491

  • NorKris
  • NorKris's Avatar
  • Offline
  • Lurker
  • Posts: 2
  • Karma: 0
Hi
Im going to atempt to connect 2 aio coolers.. In a reveiw on gamernexus at youtube it was said that the kraken is a gen 5 pump.. Does any1 Know what gen the h105 is?
The administrator has disabled public write access.

Pump gen question 4 months 2 days ago #15493

  • i7Baby
  • i7Baby's Avatar
  • Offline
  • Moderator
  • Posts: 590
  • Thank you received: 87
  • Karma: 18
Kraken uses a Gen 5 Asetek pump - www.asetek.com/press-room/news/2016/nzxt...s-of-liquid-coolers/

There's not much info on Corsair's pump - www.corsair.com/en-us/hydro-series-h105-...ce-liquid-cpu-cooler other than

Noise Level: 37.7 dBA
Static pressure: 3.9 mm/H20
Power Draw: 0.34A

But www.tomshardware.com/answers/id-2953374/...pu-cooler-pumps.html says "corsair h100i gtx are using Gen5 asetek pumps".
R7-1700 @3900/1.375V, H110iGT, ASRock x370 Taichi, GSkill 2x8GB 3200/14 @3466/14 1.38V, Samsung 250gb EVO (W10), 2TB Barracuda, 2 x R9 Nano, EVGA G2 750, Enthoo Pro, LG 34UM88. Aizo kb, M6580, HyperX Cloud
Last Edit: 4 months 2 days ago by i7Baby.
The administrator has disabled public write access.

Pump gen question 4 months 2 days ago #15497

  • Birdhunter
  • Birdhunter's Avatar
  • Offline
  • First Blood!
  • Gamer, Modder, Engineer... the usual stuff.
  • Posts: 76
  • Thank you received: 23
  • Karma: 6
It launched around 2014, if I remember correclty.
The h100i and H100i GT (later renamed to H100i v2) uses an entirely different block and launched two years earlier / later.

I couldn't find anything right now, but I think it uses the same Pumps as the H80.

As long as the Flowrate is the same, it should work (difference in Headpressure will be negated by the "reservoir"/air pockets in the individual AiOs).

May I ask, why you want to connect them together?
Since a 2xfan for cpu and a 1×fan + some air for GPU would be enough, you could just run them independant.
i7-4790K @ 4.7 GHz | 2x8GB DDR3-2400 Avexir Blitz 1.1 | Z87 Gigabyte G1.Sniper 5 | Asus ROG Poseidon GTX 1080 Ti | HyperX 3K SSDs | Phanteks Enthoo Luxe Tempered Glass | Super Flower Leadex Platinum 1,2kW | Thermaltake Riing RGB | Long Sig! | XSPC RayStorm | Alphacool NexXxoS 420 XT45 | Alphacool Eisbecher & Laing DDC 3.25 & Alphacool Aurora RGB | Hardline PETG Tubing | EKWB CryoFuel AcidGreen | Green&Black Sleeved Cables | Acer Predator Z35 | Still reading? | Logitech G302 + G633 + G410 | etc.
Last Edit: 4 months 2 days ago by Birdhunter.
The administrator has disabled public write access.

Pump gen question 3 months 4 weeks ago #15510

  • NorKris
  • NorKris's Avatar
  • Offline
  • Lurker
  • Posts: 2
  • Karma: 0
i want to connect them together to get better temps while OCing

my reason for the generation question is to know if the inlet and out let of the pump are the same as the H105
Last Edit: 3 months 4 weeks ago by NorKris.
The administrator has disabled public write access.
Moderators: 2ndPlayer, i7Baby
Time to create page: 0.084 seconds
Powered by Kunena Forum

We moderate comments on a ~24~48 hour cycle. There will be some delay after submitting a comment.

Advertisement:

  VigLink badge