HW News - Intel Xe GPUs Progressing, Partner RX 6000 Release Timing, More Intel Rocket Lake-S DetailsMonday, 02 November 2020
Hardware news this week leads into a major launch sequence from AMD. We've been busy covering GPUs for about a month now, but that'll soon switch over to AMD Ryzen 5000 CPU coverage as the 5950X, 5900X, 5800X, and 5600X come to market. More on that in a few days. For now, we'll be covering Intel's Xe GPU progress updates, AMD RX 6000 partner GPU timeline expectations, some additional Rocket Lake-S details, a Corsair water block launch, and more.
The show notes follow the video embed, as always.
This hardware news episode was filmed prior to the AMD news update, which we covered in full depth on the YouTube channel over here: AMD RX 6900 XT, 6800 XT, & 6800 Specs. We won't be going back over that announcement in this content, so you can check out the full RX 6000 details in that fully dedicated piece with additional AMD Q&A. In this one, we'll be talking RTX models being canceled or pushed back, AMD supercomputer pushes, Intel selling off part of its business, and more.
Hardware news this past week has been busy, with the main coverage being AMD's Zen 3 CPUs (5000 series, like the 5950X, 5900X, 5600X, and 5800X), which we covered in a news piece previously. Following that, for this news recap, we've been updated on the MSI "scalping" story, RTX 3080 and 3090 inventory numbers for a European retailer, and how EVGA is still getting through day-one orders for the RTX 3080. Additional stories include Intel's quasi-announcement of Rocket Lake's timelines, NVIDIA's A6000 and A40 GPU specs, and Razer's cringe-worthy credit card.
Hardware news this week has been hopping. First off, for GN, we’ve published a lot of content on YouTube in the past week: We revisited Google Stadia for latency, revisited the FX-8370 CPU, and talked about the AMD Phenom II 1090T in 2020. We’re trying to figure out how to unbury ourselves from a constant production cadence to get some time for publishing the article versions of these again, which mostly involves some optimization on the staffing side.
For this week, news includes a quick notice on an upcoming stream competition of GN Steve vs. JayzTwoCents, hosted by LinusTechTips. In actual hardware news, the RTX 3000 series (“3080,” for now) has some early plans for an announcement date, the RTX 2070 Super isn’t dead yet, AMD & NVIDIA marketshare gets discussed, Arm’s co-founder doesn’t seem to be in favor of an NVIDIA acquisition, and more.
Last week, Intel dropped the bombshell that its 7nm process would be delayed. As such, much of the news discussion this week centers on that news and its various repercussions. As is evident below, the first half of our news this week will be dedicated to the Intel news show. As it relates to Intel’s 7nm delay, Intel may be dealing with a potential lawsuit, has already reshuffled its leadership and internal organization, and is reportedly preparing to do more business with TSMC.
We also have news regarding NZXT revising its BLD warranty (finally) regarding users enabling XMP with their memory, which was ridiculous to begin with. There’s also AMD’s Q220 earnings report, and more.
Within GN, we recently took a look at a cringy waifu computer case from AliExpress, and we also compared a $1 thermal pad to a $10 thermal pad. Overall, GN has been experiencing a bit of down time as we’ve been revising some of our methodology and implementing new test tools. We posted a major piece exposing MSI’s shady and (what we believe to be) unethical review practices, too, and that’s worth watching. The improvements from these efforts should show up within the next couple weeks, so stay tuned.
News article and video embed are below.
This week’s news is anchored by yet more manufacturing woes from Intel, this time at 7nm. Intel has had to delay its 7nm products due to less than great yields, although the exact problem causing poor yields wasn’t disclosed. Joining Intel in manufacturing trouble is Samsung, as the company is reportedly struggling to improve its 5nm yields.
We also have leaks that NVIDIA is internally working on Ampere launch timelines now, which would point toward early rumors that the cards would see an August/September launch window. Igor of Igor’s Lab may be on the mark with that one. Finally, we have some smaller AMD and Cooler Master news to go over, as well as ARM interest by Nvidia.
News article and video embed are below, as usual.
While the week started off rather slowly, hardware news picked up towards the end of the week. As such, we have plenty to cover, including a GN exclusive, in which we’re able to confirm the rumored 12-pin PSU connectors for Nvidia’s Ampere. The father of Linux, Linus Torvalds, is also back in the news, this time with a rant over AVX-512. We also go over the finalized DDR5 spec, which will set the stage for industry adoption in 2021.
Elsewhere, we have a bit more news on Apple Silicon as it relates to manufacturing, a fresh Alder Lake rumor, Skylake-X Refresh reaching EOL, and a bit more. As always, the news article and video embed follow below.
This week’s news recap talks Microsoft’s hardware-accelerated GPU scheduling (something we’ve since benchmarked, written and run after this news piece), alongside discussion of technical documents for Alder Lake and the new LGA1700 socket. We’ll also be talking about a “new” GTX 1650 Ultra, some interesting marketing from T-Force, and the return of data caps.
At GN, we continue to expand our thermal analysis with thermal pads, as we looked at the Thermal Grizzly Carbonaut Pad Vs. IC Diamond Thermal Pad and compared them to pastes. We also looked at how AMD’s silicon has matured, comparing Old vs Original AMD Ryzen 5 3600 CPUs.
News video embed and article below, as usual.
This week, our news is headlined with surprise supercomputer wins, from Fujitsu’s “Fugaku” dethroning Summit for the new No.1 spot, to Nvidia’s “Selene” that uses AMD CPUs, interestingly enough. Equally newsworthy is Apple confirming its transition from Intel to Arm, in the form of “Apple Silicon,” which leaves more questions than answers right now, but the move will have big implications for the CPU landscape. Speaking of Arm, the server space is set to heat up even more with Ampere’s new Altra Max product stack.
We also have news of a massive air cooler aimed at GPUs from Raijintek, which is a bit different.
On the GN YouTube channel, we took apart the EK AIO D-RGB CPU cooler and compared it to some nearby competition (Arctic Liquid Freezer II and NZXT Kraken series, for example). We also recently overclocked the AMD Ryzen 3 3300X on LN2 for a live stream to answer the all important question of whether it can run Crysis. Separately, you'll likely also find our graphite thermal pad vs. thermal paste content interesting. We also have a new poster over at the GN store -- grab one here.
Right after we said that an AMD R3 CPU is “enough for gaming,” stealing the old Intel mantra from many generations ago, Intel decided to launch its 10-series CPUs. Intel calls this “10th Gen,” but in reality, it’s the nth Gen of a long-standing architecture. We’ve lost count at this point, but either way, it’s the 10-series of processors. The i5-10600K is the one we’re reviewing here, and it’s actually repositioned to resurrect that old “an i5 is enough for gaming” phrasing from the days of the i5-4690K and i5-6600K. This, we think, is the more interesting CPU as compared to Intel’s i9-10900K that we reviewed in the previous video, but both have points of intrigue. The biggest one is core-to-core deltas in thermals now that Intel is sanding the die down, something we showed previously in our i9-10900K delid. Today, we’re reviewing the i5-10600K.
NOTE: THIS IS A DELAYED PUBLICATION OF OUR 10600K REVIEW FROM YouTube. If you already saw this on YouTube, it's the same thing, just the written format. We have not changed anything, so new information we've uncovered about the 10600K isn't included post-launch and you'll need to check our channel for follow-up coverage, like our in-depth tuning piece on the 10600K.
We moderate comments on a ~24~48 hour cycle. There will be some delay after submitting a comment.