$475 Ultra Small Llano Gaming HTPC - June, 2012

By Published June 05, 2012 at 3:19 pm

Building a quiet, simple, and tiny gaming PC is no longer a challenge left to the most talented of modders -- with mini-ITX motherboards, IGP and APU processors that have strong integrated graphics chips, and the low-power consumption of SSDs, we can throw together a system capable of gaming, media playback, and can fit in any space for dirt cheap.

This system was built against our $800 Intel variant (which offers a dedicated video card - something this one doesn't have), but if you're looking for a more traditional gaming desktop, give our $558 budget build a look over.


Our objective here is to build an ultra-small, portable, gaming / HTPC for specific uses on a budget. Using AMD's Llano APU, we can combine reasonable graphics processing with a decent processor for medium-spec'd gaming.

Here's that list we all love:

HTPC Parts List Name Price Rebates/etc. Total
CPU / IGP AMD A8-3870K APU (COMBO 1) $120 -$13, Free Shipping $107
Memory G.Skill Ripjaws 8GB 1333MHz $44 Free Shipping $43
Motherboard ASRock A75M-ITX (COMBO 1) $90 Free Shipping $90
SSD Kingston HyperX 3K 120GB SSD $120 -$30, Free Shipping $90
Optical Drive Samsung DVD burner $24 - $24
Case & PSU SilverStone Sugo SG06 + 300W PSU $120 - $120
Total   $519 -$43 $475

Optional Add-ons (pick and choose as budget allows)

Add-on Parts List Name Price Rebates/etc. Combined Total
Blu-Ray Drive Plextor BD (remove the samsung drive) $70 Free Shjpping $545
Operating System
Windows 7 64-bit Home Premium $100 Free Shipping $645



AMD's A8-3870k Llano APU ships at 3.0GHz with some room for overclocking (as it is an unlocked CPU) and has a powerful enough (6550D) integrated GPU to output StarCraft 2 on medium settings at 1680x1050 resolution with a resolute 68FPS (source), not to mention its ability to run Civilization V on medium-low settings and even Battlefield 3 on low settings at the same resolution.

For a budget media center PC that's also capable of gaming, it doesn't get much better than this without springing for a dedicated video card and case (like the Silverstone SG08) that accommodates it.


We snagged 2x4GB of PC3-10666 memory (1333MHz) for a clean $44. The RAM is fully compatible with the motherboard (natively supporting 1333MHz and has some overclock potential) and will be more than enough for any gaming done on the rig.

G.Skill's Ripjaws series memory has worked well on dozens of our builds in the past, and their cool design fits our needs for this tiny system perfectly.


AMD's weak-spot in mini-ITX computing is its limited motherboard options - a snare that Intel doesn't have to worry about. With such a limited selection of FM1-socketed mini-ITX motherboards available, we ended up picking ASRock's A75M-ITX board, affordable at $90 with free shipping.

The board suits 1333MHz memory natively, but can clock up to 1600MHz or higher (though we don't recommend going much higher than that without first asking us about it). The board only has two memory slots, as is standard in mini-ITX boards, and can fit up to 16GB of memory should you decide to go with single 8GB sticks. It's also equipped with SATA III (6Gb/s) ports, so our below SSD will get its full usage.


After reviewing the 240GB version of Kingston's new-ish HyperX 3K SSDs, we found ourselves impressed with the company's affordability and quality design (we also posted a recent interview with Kingston about their company philosophy).


The HyperX 3K SSD is fast, low-power consuming, and reliable - the fact that it's currently bundled with a $30 rebate makes it an obvious choice.

Optical Drive:

This slim (laptop-sized) internal CD/DVD burner can do what we need it to do when it's used, and that's about all we expect from optical drives in this era of digital media. If you're looking to use this system as a media PC, grab this external blu-ray drive for $45 more instead.

Case & PSU:

300W seems so low compared to what we're used to in gaming rigs, but it's ample for such a minimalistic build as this one. Silverstone's Sugo SG06 case comes ready with 300W of power, a front-mounted 120mm fan to push a little air through the case, and enough extras to meet your media center's requirements. The case is even compatible with some aftermarket heatsinks, so that's always a nice bonus.

Keep in mind that this is a mini-ITX form factor case, so it glides into almost any space at 11.25" x 8.6" x 7".

Let us know if you have any questions about this build or would like help customizing it in the comments below! Our forums are always open to in-depth questions and more personalization of the builds, too.

-Steve "Lelldorianx" Burke.

Last modified on June 05, 2012 at 3:19 pm
Steve Burke

Steve started GamersNexus back when it was just a cool name, and now it's grown into an expansive website with an overwhelming amount of features. He recalls his first difficult decision with GN's direction: "I didn't know whether or not I wanted 'Gamers' to have a possessive apostrophe -- I mean, grammatically it should, but I didn't like it in the name. It was ugly. I also had people who were typing apostrophes into the address bar - sigh. It made sense to just leave it as 'Gamers.'"

First world problems, Steve. First world problems.

We moderate comments on a ~24~48 hour cycle. There will be some delay after submitting a comment.

  VigLink badge